Original price was: ₨ 250,000.₨ 215,000Current price is: ₨ 215,000.
Indoor Unit: FTY35CV19
Outdoor Unit: RY35CV19
Cooling Capacity: 1.0Ton
Heating & Cooling Mode
Call/WhatsApp 0300-1234545
Advanced Inverter System
R32 Refrigerant
Low Noise Performance
Modern Flat Panel Look
The Daikin 1 ton non inverter ac (FTY35CV19 / RY35CV19) is a wall-mounted split system designed for rooms that need fast, dependable cooling without the complexity of variable-speed electronics. Straightforward by design, built to Daikin’s global engineering standards, and backed by one of the most trusted names in HVAC — this unit delivers exactly what a smaller room needs, day after day.
If your priority is reliable performance, a competitive daikin aircon price, and a brand you can count on, this is where to start.
Some rooms don’t need a sophisticated inverter system. They need an air conditioner that cools quickly, runs quietly, and holds together for years without demanding attention. That is the case this unit is built for.
The FTY35CV19 indoor unit pairs with the RY35CV19 outdoor unit to deliver approximately 12,000 BTU per hour of cooling and heating capacity. The fixed-speed compressor runs at full output until the room hits the set temperature, then steps back. Simple, direct, effective.
Where the Daikin 1 ton non inverter ac sets itself apart is in the materials and build quality it brings to that simple operation. Copper condenser coils, R-32 refrigerant, and a low-noise indoor unit are not standard concessions at this capacity level — they reflect the same material choices Daikin applies across its full product range.
The Daikin 1 ton Non Inverter Air Conditioner produces around 12,000 BTU per hour — the right output level for smaller rooms where you want to feel the difference quickly. The fixed-speed compressor runs at full capacity from the moment you switch on, so the room responds fast rather than easing gradually toward your target temperature.
In hot climates where afternoon heat builds aggressively, that immediate response is a practical advantage.
This is a year-round system. In warm months, it pulls heat out of the indoor air and expels it outside. When temperatures drop, it reverses the process — extracting available heat from the outdoor air and moving it inside. One unit, one installation, both seasons covered without additional heating equipment in most climates.
The rotary compressor in this unit operates at a fixed speed — full output while running, off when the temperature is reached. That consistency is a design strength: fewer variables means more predictable performance and a mechanically simpler system that holds up reliably across years of use.
For people who have dealt with inconsistent or over-engineered systems, the stability of a fixed-speed compressor has genuine appeal.
The outdoor unit uses copper condenser coils rather than aluminum. Copper transfers heat more efficiently, which improves the overall cooling and heating performance of the refrigerant cycle. It also resists corrosion more effectively in humid conditions — a meaningful factor for long-term durability in regions with high ambient moisture.
This is one of the details that places daikin airconditioners above many comparable units at the 1 ton capacity level.
The system runs on R-32, a current-generation refrigerant with zero ozone depletion potential and a global warming potential roughly one third lower than R-410A. It also requires less refrigerant by volume to achieve the same cooling output, reducing the total environmental impact of the system over its working life.
R-32 is the standard refrigerant across Daikin’s global product range — using it in a non-inverter unit reflects the brand’s commitment to building responsibly, not cutting corners on compliance.
The indoor unit offers multiple fan speed settings so you can match airflow to the moment. Higher speeds cool the room down faster after extended heat exposure. Lower speeds run more quietly and maintain temperature with less airflow intensity — useful for night use or during calls and meetings when background noise matters.
Indoor noise between 29 and 39 dB makes this unit genuinely unobtrusive during sleep or focused work. At 29 dB, it is quieter than a whispered conversation. At 39 dB, it sits comfortably within the background noise range of a calm indoor environment.
That noise profile is a deliberate design choice. Daikin understands that comfort means more than just temperature.
All controls — mode, temperature, fan speed — are managed through a wireless remote. No app, no setup, no network dependency. You pick it up, press the button, and the system responds. For buyers who want their AC to work without a learning curve, that simplicity is a genuine feature.
|
Specification |
Detail |
|---|---|
|
Brand |
Daikin |
|
Indoor Unit Model |
FTY35CV19 |
|
Outdoor Unit Model |
RY35CV19 |
|
Cooling Capacity |
1 Ton (approx. 12,000 BTU/h) |
|
AC Type |
Wall-Mounted Split Unit |
|
Function |
Heat & Cool |
|
Technology |
Non-Inverter (Fixed Speed) |
|
Compressor Type |
Fixed-Speed Rotary |
|
Refrigerant |
R-32 |
|
Power Supply |
220–240V / 50Hz |
|
Fan Operation |
Multi-Speed |
|
Indoor Noise Level |
~29–39 dB |
|
Condenser Material |
Copper |
|
Control |
Wireless Remote Control |
|
Installation Type |
Wall-Mounted Split |
The Daikin 1 ton non inverter ac performs best where the room size, usage pattern, and cooling priority all align with what a fixed-speed system does well.
Bedrooms and personal spaces
Fast cooling, quiet running, and straightforward control make this unit a natural fit for a bedroom. By the time you’re ready to sleep, the room is already at temperature. Once it cycles to maintain, the low noise level stays out of the way.
Small offices and home workspaces
In a room you use consistently through a working day, you want steady, predictable cooling. This unit delivers a stable temperature without fluctuation or demand for management. Set it once and focus on your work.
Compact rooms in hot climates
The 12,000 BTU output is well-suited to rooms up to approximately 120 to 150 square feet where outdoor heat loads are significant. In these environments, the full-capacity response of a fixed-speed compressor cools faster than the gradual ramp of a comparable inverter unit.
Rental properties and guest rooms
Where usage is intermittent and you need a system that works reliably without oversight, this non-inverter unit is a low-complexity, cost-effective option that holds up over time without requiring regular adjustment.
Budget-conscious buyers who don’t want to compromise on quality
The daikin aircon price for this unit reflects its non-inverter positioning — but the build quality, materials, and brand support remain consistent with the rest of the Daikin range. You get Daikin engineering without paying for inverter electronics you may not need.
Daikin’s global reputation was not built through advertising. It was built through products that continued to perform across years of use in demanding conditions — hot, humid climates, heavy-use commercial environments, and residential spaces where reliability is non-negotiable.
When you look at daikin airconditioners as a range, a consistent set of qualities runs through all of them: thoughtful material choices, responsible refrigerant use, and compressor designs that are built to last rather than just to meet a spec sheet.
Those qualities are present in this 1 ton unit. The copper condenser, the R-32 refrigerant, the carefully engineered noise levels — these are not concessions to cost. They are the baseline Daikin sets for the whole range.
Daikin also carries a long track record in residential and commercial HVAC across multiple global markets. That means parts availability, qualified service technicians, and a support structure that holds up well after the point of purchase.
There are clear, specific reasons this unit earns consideration over generic alternatives at the same capacity level.
Copper condenser as standard
Many non-inverter units at 1 ton use aluminum coils. The copper condenser in this system provides measurably better heat exchange and longer resistance to environmental wear — particularly in humid conditions.
Modern refrigerant across the full range
R-32 is the current generation. Choosing deakin air conditioning with an up-to-date refrigerant means no compliance concerns as older refrigerant types face tightening regulations, and a lower environmental impact over the system’s working life.
Proven compressor reliability
The fixed-speed rotary compressor in this unit is designed for consistent operation across extended service periods. Daikin’s compressor engineering is one of the core reasons the brand holds its reputation in harsh-climate markets.
Simple, dependable operation
No app. No smart features. No complex setup. This system works the way an air conditioner should — you set it, it runs, it cools. That directness is a feature for buyers who want their cooling to be one less thing to think about.
Transparent daikin aircon price positioning
Non-inverter technology makes this unit more accessible from a cost perspective. You are not paying for variable-speed electronics you won’t benefit from in a small room used for short periods. The daikin aircon price reflects what the system is — a well-built, straightforward cooling and heating unit from a brand that does not cut corners on materials.
A non-inverter unit uses a fixed-speed compressor that runs at full capacity and switches off once the target temperature is reached. An inverter model uses a variable-speed compressor that adjusts continuously. Non-inverter systems cool rooms faster on startup and cost less upfront. Inverter systems use less electricity over long, continuous run periods. For small rooms used intermittently, the non-inverter approach is often the more practical choice.
A 1 ton capacity is generally well-matched to rooms up to approximately 120 to 150 square feet, depending on insulation, ceiling height, direct sun exposure, and the number of heat-generating appliances in the space. For precise recommendations, have a qualified HVAC technician assess your room before purchase.
Yes. The FTY35CV19 / RY35CV19 includes a heat and cool function. In heating mode, it extracts heat from the outdoor air and transfers it indoors — a process that works effectively across a wide range of outdoor temperatures. One unit provides comfort in both summer and cooler seasons.
R-32 is a modern refrigerant with zero ozone depletion potential and a significantly lower global warming potential than older types like R-22 or R-410A. It requires less refrigerant by volume to achieve equivalent cooling output, which reduces the environmental footprint of the system. It is the current standard across daikin airconditioners globally.
Yes. All split AC systems require installation by a qualified HVAC technician. Refrigerant handling, electrical connections, and proper positioning of indoor and outdoor units require specialist skills and tools. Incorrect installation affects system performance and typically voids the manufacturer warranty.
The indoor unit operates between 29 and 39 dB depending on fan speed selected. At 29 dB, that is quieter than a library. At 39 dB, it is broadly equivalent to a calm indoor background. Most users find this range entirely unobtrusive for bedroom or office use.
Clean the indoor unit’s air filters every two to four weeks during regular use. Keep the outdoor unit clear of debris and obstructions. Schedule an annual service with a qualified technician to check refrigerant levels, coil condition, drainage, and overall system health. Regular maintenance keeps performance consistent and extends the system’s working life.
Non-inverter models like this unit carry a lower upfront cost than inverter equivalents at the same capacity. The trade-off is running efficiency over long periods — inverter systems use less electricity when the unit runs continuously. For rooms used for shorter periods or where upfront value matters more than long-term energy savings, the non-inverter option offers a strong price-to-quality position, especially given Daikin’s build standard.
Daikin (sometimes written as deakin air conditioning in search queries) is a Japanese HVAC brand — the correct brand name is Daikin. It is one of the largest air conditioning manufacturers in the world, with products across residential, commercial, and industrial applications.
Built simply, built well, built by Daikin — the Daikin 1 ton non inverter ac for rooms that deserve reliable cooling every day.
